Vacuum and Cryogenics

PFC-1102

Brooks Polycold HC Fast Cycle Water Vapor Cryopump

About this part

PFC-1102 is a Brooks Polycold Fast Cycle water vapor cryopump model, documented as PFC-1102 HC in Brooks model history and legacy performance literature. The refrigeration unit circulates a proprietary refrigerant blend through a remote cryosurface to capture water vapor and other condensable molecules in vacuum processes. Brooks documentation identifies the 1102 configuration as HCFC-free and records production-era hardware changes; current Edwards literature retains PFC 1102 dimensional context within the Edwards Polycold PFC line. Published performance values below are the Brooks 2008 PFC-1102HC reference values and should be checked against the unit nameplate, voltage configuration, installed options, cryocoil, refrigerant line, and production date before installation or replacement use

Configurations vary. Verify the exact unit before choosing a replacement.

No archived photo available

Key Facts

ManufacturerBrooks Polycold / Edwards Polycold
Part numberPFC-1102
Product familyConfiguration-specific
Device typeWater vapor cryopump/cryochiller
Configuration statusConfiguration varies
Application classVacuum and cryogenic systems
CategoryVacuum and Cryogenics

Specifications

Identification
Part identifierPFC-1102
Official historical modelBrooks Automation Polycold PFC-1102 HC
Current product-line contextEdwards Polycold PFC cryochiller line
Function
Equipment typeFast Cycle water vapor cryopump / cryochiller with remote refrigerant line and cryosurface
Operating principleCirculates refrigerant through a cryosurface to freeze volatile molecules and capture water vapor in vacuum processes
Legacy Published Performance
Maximum load3,600 W at the warmest temperature under the Brooks published standard test conditions
Water-vapor pumping speed298,000 l/s theoretical maximum; 200,000 l/s conservative in-chamber value under the Brooks published standard test conditions
Ultimate operating pressure3.0 x 10^-8 Torr (4 x 10^-8 mbar) with the published standard cryocoil test basis
Maximum pump start pressure1.0 atm; Brooks notes that recommended cryopump start pressure is near normal crossover
Maximum defrost time7.0 minutes for a 2.0 m2 coil; the Brooks data sheet notes that smaller coils typically defrost faster
Cryocoil and Lines
Published cryocoil surface area2.0 m2 (21.6 ft2)
Single-circuit cryocoil16 mm (5/8 in) tube outside diameter; 40 m (132 ft) tube length
Dual-circuit cryocoils16 mm (5/8 in) tube outside diameter; 20 m (66 ft) tube length per coil
Standard refrigerant line2.44 m (8 ft)
Utilities
Published cooling-water flow13.6 l/min (3.6 gal/min) at 13 C; 33.8 l/min (8.9 gal/min) at 26 C; 54.1 l/min (14.3 gal/min) at 29 C
Power input at maximum load19.2 kW
Published nominal three-phase power options200 V 50-60 Hz; 230 V 60 Hz; 380 V 50 Hz; 400 V 50 Hz; 460 V 60 Hz; 480 V 60 Hz; verify the actual nameplate and wiring before connection
Installation
Published dimensions A-JA 1054 mm; B 711 mm; C 1689 mm; D 914 mm; E 140 mm; F 102 mm; G 203 mm; H 457 mm; I 114 mm; J 1562 mm
Published weight544 kg (1,200 lb)
Service clearanceAllow 45 cm (18 in) for utilities, refrigerant-line connection, and controls at the right-hand panel when viewed from the front
Published maximum sound level81 dB(A) under the Brooks maximum-load COOL-mode test basis
Published minimum room volume27 m3 (955 ft3)
Configuration History
Refrigerant contextBrooks documentation identifies PFC 1102 as using an HCFC-free refrigerant blend
Production-era hardwareMoisture indicator documented through 2004; buffer-unloader feature documented for units manufactured after September 2002 and as standard on all 1102 units from 2002
Dedicated drawings referenceBrooks customer manual identifies document 825119-00 for PFC 1102 process and instrumentation diagrams and electrical schematics
Documents
Hosted documentationCurrent Edwards PFC data sheet, legacy Brooks PFC data sheet, and Brooks PFC customer instruction manual are hosted locally

Documentation Downloads

Local PDF copies

Part Photos

0 images

Historical archive images for identification, labels, connectors, and condition reference, not current inventory.

Historical Listings & Prices

Historical listing data, not a current offer
Archive records2Tracked historical listing records
Historical median price$3,875.00Based on archived listing records
Recorded price range$2,500.00 - $5,250.00Low to high recorded listing price
Local documents3PDF copies available from Sonisys
Recorded price context

The typical recorded price range is $2,775.00 to $4,975.00. Based on 2 archived listing records; not a current offer, appraisal, or confirmed sale price.

View archived listing titles
  • Brooks Polycold PFC-1102 HC 700201-12-70 Cryochiller Water Vapor Cryopump
  • Lot of 2x Brooks Polycold PFC-1102 HC Cryochiller Water Vapor Cryopump #1 &#4

Archived listings

Other Part Numbers & Aliases

PFC-1102PFC 1102PFC-1102 HCPFC 1102HCBrooks Polycold PFC-1102 HC