Sensors and Gauges
GIDX2C7YSML
Brooks Instrument SolidSense II Integrated-Display Pressure Transducer
About this part
GIDX2C7YSML is a Brooks Instrument SolidSense II dead-end pressure transducer with an integrated display. Its documented ordering code specifies a 235 psi compound range, 2–10 Vdc output, an 18-inch pigtail with 4-pin AMP connector, and a 1/4-inch swivel-male face-seal process connection. The trailing L suffix is present in Brooks’ corresponding CAD configuration name but is not decoded by the GF/GI ordering guide
Configurations vary. Verify the exact unit before choosing a replacement.
No archived photo available
Key Facts
Specifications
| Manufacturer | Brooks Instrument |
| Product family | SolidSense II GF/GI Series |
| Body type | Dead end (code D) |
| Pressure range | 235 psi compound (codes X2 and C) |
| Signal output | 2–10 Vdc (code 7) |
| Electrical connection | 18-inch pigtail with 4-pin AMP connector (code Y) |
| Process connection | 1/4-inch face seal, swivel male (code SM) |
| Supply voltage | 13–30 Vdc for the GI display version with 0–10 Vdc-class output |
| Supply current | 30 mA maximum for the GI display version |
| Output impedance | 100 ohms maximum |
| Load resistance | 10 kohms typical |
| Output noise | 10 mV zero-to-peak |
| Transducer accuracy | ±0.25% of full scale, BFSL |
| Response time | Less than 5 ms |
| Proof pressure | 200% of full scale for ranges through 2,000 psi |
| Burst pressure | 400% of full scale |
| Operating temperature | -20°F to 140°F (-29°C to 60°C) |
| Storage temperature | -40°F to 167°F (-40°C to 75°C) |
| Compensated temperature | 68°F to 140°F (20°C to 60°C) for the 0–10 Vdc output class |
| Display | 7-segment red LED with automatic negative indication |
| Display accuracy | ±0.25% of reading ±1 count for psi, excluding transducer-output accuracy |
| Character height | 0.30 inch |
| Display rotation | Continuous rotation covering four quadrants |
| Selectable units | Psi or kPa |
| Wetted parts | 316L stainless steel, SEMI F20 |
| Housing | Stainless steel and polymer plastics |
| Surface finish | Compliant with SEMI F19 |
| Cleanliness | Compliant with ASTM F1374-92 (2005) |
| Internal volume | 1.79 cc |
| Approximate shipping weight | 0.70 lb (0.32 kg) |
What Does GIDX2C7YSML Mean?
The Brooks GF/GI product-description code decodes the configured model through the SM process-connection segment. The final suffix is not defined in the public ordering table.
| Segment | Field | Interpretation |
|---|---|---|
| GI | Base model | Pressure transducer with integrated display |
| D | Body type | Dead end |
| X2 | Pressure/vacuum range | 235 |
| C | Pressure/vacuum units and reference | Compound, psi |
| 7 | Output | 2–10 Vdc |
| Y | Electrical connection | 18-inch pigtail with 4-pin AMP connector |
| SM | Process fitting | 1/4-inch face seal, swivel male |
| L | Additional suffix | Not defined in the public GF/GI product-description code. Brooks lists a GID-Y-SM-L CAD configuration, but the suffix meaning requires the applicable factory drawing or order record. |
4-Pin AMP Connector Wiring
The manufacturer’s Type Y voltage-output wiring table defines a three-wire signal connection plus drain.
| Pin | Function |
|---|---|
| 1 | + Supply (+E) |
| 2 | Common |
| 3 | + Output (+O) |
| 4 | Drain |
Manufacturer Cross-Reference and Marking Notice
TE Connectivity’s 2024 marking-change notification includes an exact affected-product entry for GIDX2C7YSML.
Installation and Service Notes
Installation practices documented for SolidSense II GF/GI pressure transducers.
- Keep the cleanroom-packaged transducer sealed until installation in a clean environment.
- Maintain at least 1 slpm (0.05 scfm) of inert purge gas during installation; electronic-grade nitrogen is recommended.
- For VCR-compatible connections, follow the documented fitting procedure and avoid transferring installation stress into the transducer.
- Verify seal integrity using an appropriate helium leak-test procedure.
- Connect the cable braid and drain wire to earth ground to reduce inductive signal interference.
- The transducer is factory calibrated and normally does not require field zero adjustment.
Documentation Downloads
Local PDF copiesPart Photos
0 imagesHistorical archive images for identification, labels, connectors, and condition reference, not current inventory.
Historical Listings & Prices
Historical listing data, not a current offerThe typical recorded price range is $117.29 to $127.70. Based on 2 archived listing records; not a current offer, appraisal, or confirmed sale price.
View archived listing titles
- Brooks Instruments GIDX2C7YSML Pressure Transducer,0-235PSIG,O/P:2-10V,CN+9607