5136-PFB-VME is an SST PROFIBUS interface card for VMEbus hosts, later associated with the Woodhead and Molex product lineage. Exact-part SST hardware and software guides document the card, while the PROFIBUS product registry identifies the same order number under Molex. The card provides PROFIBUS connectivity for a VMEbus computer, motion controller, or programmable controller and supports DP master and DP slave operation; firmware, network configuration, switch and jumper settings, host addressing, and installed-system compatibility must be verified before replacement or commissioning
Configurations vary. Verify the exact unit before choosing a replacement.
Application classIndustrial automation and process equipment
CategoryBoards and Controllers
Specifications
Identification
Part number
5136-PFB-VME
Product type
PROFIBUS VME interface card
Manufacturer lineage
SST, a division of Woodhead Canada Limited; later listed under Molex LLC
Host interface
VME format
IEEE 1014, 6U height, P1 compatible
Network
Supported operation
PROFIBUS DP master, DP slave, and FDL (layer 2) messaging; the SST hardware guide also identifies FMS network support
PROFIBUS data rate
9.6 kbaud to 12 Mbaud
Memory
Shared RAM
256 Kbytes, accessible as one 256-Kbyte linear block or as 16-Kbyte pages
Local RAM
512 Kbytes
Flash memory
512 Kbytes sectored flash for programs and configuration data
Electrical
Maximum current consumption
950 mA at 5 V
Environmental
Operating temperature
0 to 60 degrees C
Storage temperature
-40 to 85 degrees C
Connections
PROFIBUS connectors
Standard PROFIBUS DB-9 and 5-position Phoenix Combicon connector
Configuration
Configured-unit rule
Confirm firmware module, flash contents, network role and parameters, VME address mode, interrupt selection, switch and jumper settings, byte order, and host-system compatibility from the physical card and applicable system documentation
